SABINE FBX-1020 Betriebsanleitung PDF herunterladen

OPERATING GUIDE

CONGRATULATIONS! You now have the state-of-the-art in feedback control. Your Sabine FBX-1020Plus Feedback Exterminator

— a single

channel, 20-bit digital filtering device

— gives you automatic real-time feedback control and increases the clarity and volume of your system.

The FBX-1020Plus incorporates the latest in digital signal processing technology. It automatically senses feedback in a sound system and determines

its pitch. It then places one of 12 Constant Q micro-filters on the resonating frequency and eliminates the feedback in typically less than one second.

Special features of the FBX-1020Plus:

• An improved algorithm that allows the FBX-1020Plus to better distinguish the difference between feedback and music

• Improved 20-bit digital resolution, providing superior dynamic range and signal-to-noise ratio

• 12 feedback filters, giving the unit more feedback elimination power for the toughest venues.

• ClipGuard™ adaptive clip level control, with TURBO setup mode, increases the effective dynamic range by more than 10dB

and makes setup faster and easier.

• Two stage reset function allows you to reset just dynamic filters or all filters.

• Standard FBX features such as lockable fixed filters and switchable 1/10- and 1/5-octave Constant Q filters are also included

and now have convenient front panel switches.

QUICK-START OPERATION 1

DECLARATION OF CONFORMITY 2

ABOUT THE FBX-1020PLUS 3

FREQUENCY RESPONSE 3

WORLD'S BEST FEEDBACK CONTROLLER 3

WHO N EEDS FBX? 3

WHY THE FBX? 3

DIRECT HIT ON FEEDBACK! 3

ACTIVE/BYPASS SWITCH 4

SIGNAL LEVEL 4

DUAL-FUNCTION RESET 4

SET TOTAL NUMBER OF FILTERS 4

SET FIXED 4

A/C POWER INPUT 4

AUDIO INPUTS & OUTPUTS 4

FBX-1020PLUS CONTROLS 4

LOCK F IXED FILTERS 4

FIFTH OCTAVE 4

FILTER S TAGE ACTIVITY 4

POWER SWITCH 4

FUSE 4

APPLICATION DIAGRAMS 5

FBX SETUP FOR MONITORS 5

FBX S ETUP FOR E NTIRE MIX 5

FBX-1020PLUS OPERATING INSTRUCTIONS 6

WHERE THE FBX FITS IN YOUR SOUND SYSTEM 6

A NOTE ABOUT GRAPHIC EQUALIZERS 6

UNDERSTANDING FIXED & DYNAMIC FILTERS 6

CLIPGUARD™ ADAPTIVE CLIP L EVEL CONTROL 6

CLIPGUARDTM TURBO MODE GUIDE 6

FBX SETUP FOR SINGLE INSERT POINT 7

FBX SETUP FOR INSERT SEND & RETURN 7

HOW T O OPERATE T HE FBX-1020PLUS 7

HOW TO U SE THE FBX-1020PLUS FEATURES 8

USING THE LOCK FIXED FEATURE 8

SELECTING FILTER WIDTH 8

IMPORTANT OPERATING CONSIDERATIONS 8

MEMORY 8

BYPASS MODE 8

RESETTING THE FILTERS 8

TURBO MODE SETUP 8

DEFEATING TURBO MODE 8

MOBILE VS. STATIONARY MICROPHONES 8

FREQUENTLY ASKED QUESTIONS 9

INDEX 9

FBX-1020PLUS ENGINEERING SPECIFICATIONS 10

CAUTIONS & WARNINGS 11

LIMITED WARRANTY 12

QUICK-START OPERATION

For best results, read all operating instructions before using the FBX-1020Plus. If you're already familiar with the FBX

or just want a basic overview of FBX operation, this simple quick-start procedure is for you. More detailed instructions

are on page 7 inside this operating guide.

1.Place the FBX between the output of your mixer and the input of your power amp.

2.With the master volume down, put the FBX-1020Plus in active mode (red BYPASS LED off), then slowly raise the mixer

master volume to the point of feedback.

3.Keep raising the master volume until all of your fixed filters and one dynamic filter are set, then lower the volume slightly.

(Factory default is nine fixed and three dynamic filters.) The rest of the filters continually catch and update new feedback

frequencies throughout the program. You're ready to go.

READ THE ENTIRE OPERATING GUIDE FOR COMPLETE INSTRUCTIONS.

Click on Section Heading to go to that page

1 2 3 4 5 6 ... 11 12

Inhaltsverzeichnis

Seite 1 - QUICK-START OPERATION

Seite 2 - DECLARATION OF CONFORMITY

10FBX-1020PLUS ENGINEERING SPECIFICATIONS(SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE)FILTERS12 independent digital notch filters, controlled auto

Seite 3 - ABOUT THE FBX-1020Plus

11Warning! This equipment must be earthed.Caution! Risk of electric shock. Do not open.Caution! Shock hazard. Do not remove covers. No user serviceabl

Seite 4 - FBX-1020PLUS CONTROLS

Seite 5 - APPLICATION DIAGRAMS

2DECLARATION OF CONFORMITYApplication of Council Directive: 73/23/EEC and 89/336/EECStandard to which conformity is declared:EN 60065:1993EN 50082-1:1

Seite 6

3ABOUT THE FBX-1020Plus3Direct Hit on Feedback!The FBX targets feedback without taking a big chunk out of yoursound. Tests prove that a single 1/3-oc

Seite 7 - TURBO Mode Guide

4FBX-1020PLUS CONTROLSA/C Power InputThe FBX-1020Plus is factory configured to operate at either 115VAC or 230 VAC. Using the wrong input voltage may

Seite 8

5APPLICATION DIAGRAMSFBX Setup for Entire MixFBX OUTMain OUTFBX INAmp INAmplifierAll other SignalProcessingEquipmentFBX Setup for MonitorsMonitor

Seite 9 - FREQUENTLY ASKED QUESTIONS

6Where the FBX fits in your sound systemPlace the FBX anywhere in the sound system that a graphicequalizer might be used to control feedback. The most

Seite 10

7!ReadThisIMPORTANT TIPYou can mix 1/10- and 1/5-octave filters in the samechannel. If you have an especially bad feedback prob-lem, try making the f

Seite 11 - Warning!

8How To Use The FBX-1020Plus FeaturesUsing the LOCK FIXED featureIn very few situations the FBX may mistake music for feedbackand drive the fixed filt

Seite 12 - LIMITED WARRANTY

9FREQUENTLY ASKED QUESTIONSQ. Can I place the FBX in the mixer’s EQ loop?A. Yes.Q. Can I place the unit in the mixer effects loop?A. Avoid this confi

Kommentare zu diesen Handbüchern

Keine Kommentare

SABINE FBX-1020 Betriebsanleitung

Stöbern Sie online oder laden Sie Betriebsanleitung nach Audio-Equalizer SABINE FBX-1020 herunter. SABINE FBX-1020 Operating instructions [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern